HELM-C Carbolescer

Get A Quote Contact Share

Advantages

• Very low pressure drops

• Remaining oil aerosol content no more than 0.003 ppm

• Equal air distribution

• Long service life

• User-friendly replacement procedure

• Oil indicator

Oil in aerosol form and oil mist lower the quality of the compressed air and can damage pneumatic equipment.

The patented Carbolescer can eliminate both the aerosol and mist forms of oil. It consists of a pleated separator layer, a carbon layer, and a particulate layer. The pleated separator layer removes the aerosol form of oil. When oily compressed air enters the unit, the oil droplets coalesce and run down the filter medium. The collected liquid oil is automatically drained off. The pleated separator filters out oil contaminants as small as 0.01 microns. In addition to the pleated separator, the activated carbon layer adsorbs oil mist. The oil mist is physically retained by the activated carbon granules and as a result, the oil content can be reduced to 0.003 ppm. The final particulate filter layer actively removes carbon dust and maintains the quality of the compressed air.

TECHNICAL SPECIFICATIONS

Model	Max. Remaining Oil Aerosol Content @ 21°C	Capacity		Max. Pressure	Connection Inlet/Outlet	Length	Height
Model	ppm	(Nm³/h)	cfm	(barg)	Connection Inlet/Outlet	(inch)
HELM-US-C G100-16	0,003	35	21	16	1/2" NPT	4	15
HELM-US-C G150-16	0,003	45	26	16	1/2" NPT	5	17
HELM-US-C G200-16	0,003	50	29	16	1/2" NPT	5	20
HELM-US-C G250-16	0,003	70	41	16	1" NPT	5	21
HELM-US-C G300-16	0,003	85	50	16	1" NPT	5	23
HELM-US-C G500-16	0,003	100	59	16	1" NPT	5	25
HELM-US-C G600-16	0,003	130	76	16	1 1/2" NPT	5	26
HELM-US-C G851-16	0,003	170	100	16	1 1/2" NPT	6	30
HELM-US-C G1210-16	0,003	200	118	16	2" NPT	6	32
HELM-US-C F150-14	0,003	255	150	14	ANSI 2" Flange	20	42
HELM-US-C F300-14	0,003	510	300	14	ANSI 2" Flange	20	46
HELM-US-C F600-14	0,003	1020	600	14	ANSI 2" Flange	20	60
HELM-US-C F800-14	0,003	1360	800	14	ANSI 3" Flange	20	64
HELM-US-C F1200-14	0,003	2040	1200	14	ANSI 3" Flange	24	63
HELM-US-C F1600-14	0,003	2720	1600	14	ANSI 3" Flange	24	65
HELM-US-C F2100-14	0,003	3570	2100	14	ANSI 4" Flange	28	65
HELM-US-C F2750-14	0,003	4675	2750	14	ANSI 4" Flange	28	70
HELM-US-C F4200-14	0,003	7140	4200	14	ANSI 6" Flange	31	69
HELM-US-C F6000-14	0,003	10200	6000	14	ANSI 6" Flange	31	79
HELM-US-C F8000-14	0,003	13600	8000	14	ANSI 8" Flange	33	82
HELM-US-C F10000-14	0,003	17000	10000	14	ANSI 10" Flange	39	86
HELM-US-C F12000-14	0,003	20400	12000	14	ANSI 12" Flange	39	109
HELM-US-C-G50-50	0,003	85	50	50	-	-	-
HELM-US-C-G100-50	0,003	170	100	50	-	-	-
HELM-US-C-G200-50	0,003	340	200	50	-	-	-
HELM-US-C-G300-50	0,003	510	300	50	-	-	-
HELM-US-C-G400-50	0,003	680	400	50	-	-	-
HELM-US-C-G500-50	0,003	850	500	50	-	-	-
HELM-US-C-F600-40	0,003	1020	600	40	-	-	-
HELM-US-C-F1200-40	0,003	2040	1200	40	-	-	-
HELM-US-C-F2400-40	0,003	4080	2400	40	-	-	-
HELM-US-C-F3200-40	0,003	5440	3200	40	-	-	-
HELM-US-C-F4800-40	0,003	8160	4800	40	-	-	-
HELM-US-C-F6400-40	0,003	10880	6400	40	-	-	-
HELM-US-C-F8400-40	0,003	14280	8400	40	-	-	-
HELM-US-C-F11000-40	0,003	18700	11000	40	-	-	-
HELM-US-C-F16800-40	0,003	28560	16800	40	-	-	-
HELM-US-C-F24000-40	0,003	40800	24000	40	-	-	-
HELM-US-C-F32000-40	0,003	54400	32000	40	-	-	-
HELM-US-C-F40000-40	0,003	68000	40000	40	-	-	-
HELM-US-C-F48000-40	0,003	81600	48000	40	-	-	-