22-110 kW   7,5-8,5-10-13 bar  1,03-23,1 m³/min


Oil Injected, Two-Stage, Direct Coupled, Fixed/Variable Speed

Rotary Screw Air Compressors

Next gen compact compressors maximize your energy saving, minimize your total cost of own.

 General Features 

• IE5 efficiency-class IPM electric motors

• Two-stage screw block

• Water cooling (37 kW and above)

• Soft start with variable speed power transmission

• Operating with low noise level

• Integrated dryer (optional)

• Heat recovery (optional)

 Screw Block

• Two-stage screw produces energy efficiency by up to 10%

• Higher flow rate by up to 10%.

• Thanks to low compression rate low axial and compression forces

• Zero transmission losses by compact direct power transmission

• No requirement for a power transmission element results in a compact design

• Low axial and compression forces due to low compression ratio between screw blocks

• Thanks to low rotor speeds, a long service life

• Thanks to two-stage compression, low noise and vibration levels

 Electric Motor

• Ultra Premium IE5 energy efficiency-class electric motors

• Internal Permanent Magnet Motor (IPM)

• Compact design

• F-class insulation

• Optimum oil cooling at all speeds for high efficiency

• Low noise levels

• Grease-free lubricated motor bearings


 Electric Motor Drive

• The drive and IPM meet the requirements of IES2 (EN50598)

• Functionality in a single unit

• Uses fewer components

• Long service life helps minimize environmental impact.

 Oil Filter

• Non-metallic, environmentally friendly and recyclable oil filter

• Aluminium housing

• Easy maintenance

• Compact design


 Water Separator

• Compact, integrated, and unique design

• Separation performance is %99 even in very hot and humid conditions

• High energy efficiency with minimal pressure loss

 Air Filter

• Two-stage filtration (Initial filtration/precision filtration)

• 99.9% efficiency in particle separation down to microns

• Low pressure loss (starting pressure fall<3mbar)

• Easy maintenance

• Long service life


 Cooling System

• High cooling efficiency in compact air and oil heat exchangers

• Suitable design for operating up to 45°C

• Radial fan for high cooling efficiency (37 kW and above)

• Low noise level with low speed radial fans

• Cooling fan driver for maximum energy efficiency

 Controller

• 7” LED Display

• Group operation of up to 4 compressors

• Possibility to choose Master/Slave compressor

• Fast communication with ModbusTCP

• Ability to connect to customer DCS system via ModbusTCP

• Compact construction with integrated driver and controller

• Weekly scheduler for starting/stopping the machine at 2 different time intervals can be individually set for each day of the week

• Dual PID feature can run simultaneous PID for temperature and pressure

• Pressure PID ensures energy-efficient operation by maintaining the pressure at the desired level

• Temperature PID controls the fan speed to maintain the screw block’s most efficient operating temperature

• All inverter and compressor control data are managed from a single point

• Ability to determine co-aging times of the system with selectable parameters

• Built-in phase sensor

• User-friendly on-screen interface

 22-110 kW   7,5-8,5-10-13 bar  1,03-23,1 m³/min

TECHNICAL  SPECIFICATIONS

Model Pressure Capacity* Motor Power Connection Size Dimensions (mm) Weight Noise Level
Minimum Maximum
bar psi m³/min cfm m³/min cfm kW/HP Length Width Height kg dB (A)
IMPETUS VSD 22 7,5 110 1,03 36 4,35 154 22/30 G 1  1/4" 1095 955 1580 750 72
8,5 125 1,04 37 4,17 147 1095 955 1580
10 145 1,03 36 3,76 133 1095 955 1580
IMPETUS VSD 30 7,5 110 1,64 58 6,36 225 30/40 G 1  1/4" 1095 955 1580 875 72
8,5 125 1,62 57 5,91 209 1095 955 1580
10 145 1,59 56 5,41 191 1095 955 1580
IMPETUS VSD 37 7,5 110 1,79 63 7,76 274 37/50 G 1  1/2" 1250 1195 1860 1220 71
8,5 125 1,79 63 7,27 257 1250 1195 1860
10 145 1,77 63 6,52 230 1250 1195 1860
IMPETUS VSD 45 7,5 110 2,33 82 9,3 329 45/60 G 1  1/2" 1250 1195 1860 1400 72
8,5 125 2,31 82 8,73 308 1250 1195 1860
10 145 2,30 81 8,01 283 1250 1195 1860
IMPETUS VSD 55 7,5 110 2,62 93 11,6 410 55/75 G 2" 1450 1400 1965 1620 72
8,5 125 2,56 90 10,85 383 1450 1400 1965
10 145 2,55 90 9,54 337 1450 1400 1965
IMPETUS VSD 75 7,5 110 3,57 126 16,01 565 75/100 G 2" 1450 1400 1965 1850 72
8,5 125 3,63 128 15,27 539 1450 1400 1965
10 145 3,55 125 13,22 467 1450 1400 1965

- Unit performances measured in reference conditions which are 1 bar absolute air Pressure, %0 relative humidity, 20°C inlet air temperature, 71°C thermostatic valve set temperature and use of Smartoil.
- Hertz Kompressoren reserves its rights to make changes in its products and specifications without prior notice.
* Refers to free air delivery measured according to ISO 1217:2009, Annex C standard.

TECHNICAL  SPECIFICATIONS (VSD)

Model Pressure Capacity* Motor Connection Dimensions (mm) Controller Weight Noise
Minimum Maximum
bar psi m³/min cfm m³/min cfm kW/HP Length Width Height kg dB (A)
IMPETUS VSD 22 7,5 110 1,03 36 4,35 154 22/30 G 1  1/4" 955 1095 1580 Smartronic Pro 750 72
8,5 125 1,04 37 4,17 147
10 145 1,03 36 3,76 133
IMPETUS VSD 30 7,5 110 1,63 58 6,36 225 30/40 G 1  1/4" 955 1095 1580 Smartronic Pro 875 72
8,5 125 1,6 57 5,91 209
10 145 1,57 55 5,41 191
IMPETUS VSD 37 7,5 110 1,77 63 7,76 274 37/50 G 1  1/2" 1195 1250 1860 Smartronic Pro 1220 71
8,5 125 1,77 63 7,27 257
10 145 1,76 62 6,52 230
IMPETUS VSD 45 7,5 110 2,3 81 9,3 329 45/60 G 1  1/2" 1195 1250 1860 Smartronic Pro 1400 72
8,5 125 2,28 80 8,73 308
10 145 2,27 80 8,01 283
IMPETUS VSD 55 7,5 110 2,6 92 11,6 410 55/75 G 2" 1400 1450 1965 Smartronic Pro 1620 72
8,5 125 2,54 90 10,85 383
10 145 2,53 89 9,54 337
IMPETUS VSD 75 7,5 110 3,51 124 16,01 565 75/100 G 2" 1400 1450 1965 Smartronic Pro 1760 72
8,5 125 3,63 128 15,27 539
10 145 3,57 126 13,22 467
IMPETUS VSD 90 7,5 110 5,21 184 18,95 669 90/125 DN65 1805 2775 1926 Smartronic c300 2846 75
8,5 125 5,21 184 17,99 635
10 145 5,18 183 16,46 581
IMPETUS VSD 110 7,5 110 6,72 237 23,1 817 110/150 DN65 1805 2775 1926 Smartronic c300 3230 74
8,5 125 6,82 241 22,0 777
10 145 6,62 234 20,2 711

- Unit performances measured in reference conditions which are 1 bar absolute air pressure, %0 relative humidity, 20°C inlet air temperature, 71°C thermostatic valve set temperature and use of Smartoil.
- Hertz Kompressoren reserves its rights to make changes in its products and specifications without prior notice.
* Refers to free air delivery measured according to ISO 1217:2009, Annex E standard.